|
|
|
|
Built to last AND to be rebuildable in the real world: Clamp cams, vertical guide assemblies, entire clamp assembly, finger sets, apron bushings, and the apron leaf are replaceable. IMPORTANT feature:
Each finger is individually adjustable for leading edge alignment, helping you
avoid "the dimples" over time, and greatly increasing the useful life
of the finger set. Replacement fingers, individually or in sets, are readily
available and affordable. ..
Two extra fingers are included: a SPECIAL 4" FINGER
to bend up to 3/16" mild steel w/o adjusting beam set back or
clamping pressure, and a spare stock 4" so you have one to
customize.
.Bolt
on radius bars are optional, including 1/16 through 1/2 radius (1/2"
r = 1" dia.), OR, radius can be added to the leading edge of the fingers in
a wide range of radii. For larger radii, see our Radius Brake..
Stock finger widths are 2, 3 & 4. OR, you may specify any
assortment or width up to the full width of the brake. Ask about the low cost of
additional fingers or full sets. How about a few 8 fingers, or 24, or a
one piece finger the full width of the brake? Super smooth cam action
with near zero clamp creep to stay on your mark, even after years of use.
4, 5, 6, 8 &10 models (actual bending length is 1"
longer) Maximum depth of box: 4 1/2 inches 16ga, 14ga, or 12ga mild steel capacity on 1 1/2
flange with apron angle installed
Minimum reverse bend: 1/2 (or may be ordered with optional 1/4 return)
Beam set back adjustment: 1 (additional set back is optional and
will be needed for radii over 1/2)
Lift of beam: 2 1/4 at leading edge of fingers*
Six (6)* adjustable truss rods for center alignment. *Exceptions: # U4-4816 & U4-4814: lift of beam 1 1/4; one counter
weight; 4 adjustable truss' Stop rod for repeat
bends is included All these
models are floor mount except U4-4816 (legs optional) Approximate shipping weights: 4
16ga 500 lbs.,
14ga 710 lbs., 12ga
1280 lbs. 8 16ga
2350 lbs., 14ga 2490 lbs., 12ga 2780 lbs. 6
16ga 1530 lbs., 14ga 1750 lbs.,
12ga 1900 lbs. 10
16ga 2940 lbs., 14ga 3090 lbs.,
12ga 3400 lbs. Three
year material and workmanship warranty. Transportation is the buyers expense.
|
|
Details [ Prices ] [ Options ] Straight Brakes [ S Series ] [ L Series ] Finger Brakes [ BP Series ] [ U Series ] [ C Series ] Brake Options [ TD Option ] [ Hydraulic Assist Option ] [ Radius Brake ] [ Bead Roller ] Copyright © 2001
ProFormer, LLC
|
