|
|
|
|
Built
to last AND to be rebuildable in the real world: Nose
bar, clamp cams, entire clamp assembly, vertical guide assemblies, apron
bushings, and the apron leaf are replaceable. 4, 5, 6, 8
&10 models (actual bending length is 1" longer) Openings at clamp ends allow forming
three sides of 2" pan. 20ga, 18ga, 16ga, 14ga
or 12ga mild steel capacity on 1 1/2 flange with apron angle installed. Super smooth cam action
with near zero clamp creep to stay on your mark, even after years of use. Minimum reverse bend:
1/2, or you may order 1/4 min. reverse bend apron. Beam set back
adjustment: 1 (additional set back is optional and will be needed for radii
over 1/2) Lift of beam: 2 1/4
at leading edge* Six (6)
adjustable truss rods for center alignment* * Two exceptions: # L4816 & L4814: lift of
beam 1 1/4; one counter weight; 4 adjustable truss rods Stop rod for repeat
bends is included. All these are floor mount except 4' 16ga (legs are
optional) .Bolt on radius bars
are available from 1/16 through 1/2 radius (1/2 radius = 1
diameter). OR, radius can be added
to the leading edge of the nose bar. For larger radii, look into our Radius
Brake. .Transportation
is the buyers expense. Approximate
shipping weights: 4'
16ga 470 lbs., 14ga 670 lbs., 12ga 1100 lbs.
6 16ga 1420 lbs, 14ga
1580 lbs, 12ga 1800 lbs. 8
20ga 1750 lbs, 18ga 2040 lbs., 16ga
2135 lbs., 14ga 2280 lbs., 12ga 2390 lbs., 10
20ga 2250 lbs., 18ga 2380 lbs., 16ga 2640
lbs., 14ga 2790 lbs., 12ga 3100 lbs. .Three year material and workmanship warranty. |
|
Details [ Prices ] [ Options ] Straight Brakes [ S Series ] [ L Series ] Finger Brakes [ BP Series ] [ U Series ] [ C Series ] Brake Options [ TD Option ] [ Hydraulic Assist Option ] [ Radius Brake ] [ Bead Roller ] Copyright © 2001
ProFormer, LLC
|
