|
|
|
|
ProFormer
BP series include 22ga, 20ga and 16ga models in 3, 4, 5 & 6.
(For Industrial Class
finger brakes starting at 4 16ga and going up to 10 12ga, see the U
series & C
series). Built to last AND to be rebuildable in the real world: Clamp cams, vertical guide assemblies, entire clamp assembly, finger sets, apron bushings, and on the 5' & 6' the apron leaf, are replaceable.
Maximum depth of box: 3 1/2 inches 16 gauge mild steel capacity on 1 1/2 flange with apron angle installed Minimum reverse bend:
1/2 (or may be ordered with optional 1/4 return) Beam set back adjustment: 1 (additional set back may be ordered) Lift of beam: BP4816 is
1 1/4 at narrowest edge, BP7216 is 1 1/2
Four (4) adjustable heavy truss bars for center alignment Bolt on radius bars are available for
this model from 1/16 through 1/2 radius. OR, radius fingers are available
in a wide range of popular radii. (1/2 radius = 1 diameter). .IMPORTANT
feature: Each finger is individually
adjustable for leading edge alignment, greatly increasing the useful life of the
set. Finger widths are 2, 3
& 4. Or you may specify. .SPECIAL 4" FINGER
is available to bend up to 3/16" mild steel w/o adjusting set back
or clamping pressure (or damaging one of the good fingers). Also a spare
4" finger can be ordered. Use it to cut a slot at an odd width, like
3/4 or 1 3/8. Additional spares are so inexpensive you may want several
for experimenting. Full length one piece finger is also available.
Transportation is the buyers expense. Three year material and workmanship warranty.
|
|
Details [ Prices ] [ Options ] Straight Brakes [ S Series ] [ L Series ] Finger Brakes [ BP Series ] [ U Series ] [ C Series ] Brake Options [ TD Option ] [ Hydraulic Assist Option ] [ Radius Brake ] [ Bead Roller ] Copyright © 2001
ProFormer, LLC
|
